24 Port 10/100 Mbps Network Switch:
Our rack mount 10/100Mbps network switch is designed to allow expansion/creation of an Ethernet network between computers. This product will allow you to link up to 16 wired Ethernet devices e.g. network printers, desktop computers, Xbox, network cameras, network attached storage. This product is plug-and-play and will work with virtually every operating system. No configuration is required with this product making it quick and easy to connect your devices.
This product includes:
1x 19" 24 way network switch.
2x Rack-mount brackets.
1x UK mains lead.
Supports 24 10/100Mbps autodetect half/full duplex ports with TX/FX.
Built in 2Mbps SRAM buffer.
Supports 2000 MAC addresses
Supports 802.3x flow control for full duplex operation and back pressure function for half duplex operation.
Supports TP interface auto MDIX function for auto TX/RX swap.
LED indicator provides the status of each port.
Cable supported: 10BASE-T: 2-pair UTP Cat. 3,4,5; 100BASE-TX: 2 pair UTP Cat.5.
24 Port Cat 6 Patch Panel:
The Comlynx Patch Panel range is designed to allow patching of voice, ISDN and high-speed data signals within Cat 5e structured cabling systems.
High performance. Meets EIA/TIA 586A and ISO 11801 specifications.
• Easy to terminate. The high-density IDC blocks are compatible with industry standard BT/Krone termination tooling.
• Effective cable management via cable management loops and cable ties (supplied).
• Versatile. Colour coded for both T568A and T568B wiring.
• Clear port identification, achieved by both numerical marking and user defined marking pads.
HF Performance: Attenuation Loss: Less than 0.4dB from 0 to 100MHz, Near end crosstalk attenuation (NEXTA): Less than 40dB between pairs from 0 to 100MHz, Return Loss: Better than 14.0 dB between 0 and 100MHz.
RJ45 Socket: 50 micro inches gold plating over nickel, Copper alloy contacts, Plastic housing material: UL94V-O PBT
IDC Contacts: Extra hard copper alloy contacts IDC Plastic Material: UL94V-0 ABS, Toleranced to accept 22 - 26 AWG wiring, stranded or solid.
Panel Finish: Durable, matt black powder coating with screen-printed port identification, Plating thickness: 0.03mm +/-0.01mm, Panel thickness: 1.6mm metal.Please note: The product you will receive may differ from the product's shown in the image.