Cat 6 Tool - Free Module 25x50mm RJ45 Ethernet Network
Cables are simply attached to a rear wiring coded receptacle which is held in place by means of a zinc die cast thumb-wheel.
Type A and type B wiring schemes are both catered for together with a cable tie point for secure cable retention.
This product has been manufactured to very high standards and offers a genuine tool-free solution over traditional connection
Housing: ABS/Polycarbonate mixed, UL94 VO.
Insert: PBT UL94 VO.
RJ45 Conductor: Phosphor Bronze.
Contact Area: 50 micro-inch min. Gold plated.
Solder Area: 50-60 micro-inch. Tin/Lead plated, 50-60 micro-inch Nickel plated on the contact side of the conductor.
IDC Housing: Polycarbonate, UL94 VO.
IDC Terminal: Phosphor Bronze with 50 micro-inch Tin/Lead plating over 50-60 micro-inch Nickel plating.
Housing Colour: White - other options to special order.
PCB: FR4 1.2mm thickness 2 Layer.
IDC Cap: White, ABS UL94 HB.
Thumb Screw: Zinc - Die Cast.
Wiring Label: T568A & T568B identification.
Insertion Force: 900gms for 8 Contacts.
Retention: 7.7kg between Jack and Plug.
Operation Temp: -40°C to 80°c.
Durability: 750 cycle, contact resistance check every 100 cycles @ 20 cycles/minute max
CAT6 Certified: Channel Link to ANSI/TIA/EIA 588-B.2-1
|Quick Find Code:||N/A|